gang saw braba

//gang saw braba

gang saw braba

Want create site? Find Free WordPress Themes and plugins.

gang saw

A head saw, framesaw, gang saw or head rig, is thesaw that makes the initial cuts in a log at a sawmill, turning a log into cants, or planks of wood.

gang saw,The original powered head saw was composed of long, narrow blades that used an up-and-down motion, a reciprocating saw. Each blade was set at a fixed width meaning each log was cut identically, regardless of flaws.

gang saw,This design was not energy efficient and around 1860 sawmills began to adopt the more efficient circular saw. In the 1870s, the limitation of log size due to the radius of the circular saw was improved with the introduction of the double circular saw- with one blade atop the other. In the 1880s, the band saw was introduced and was able to allow the head saw to handle logs of nearly unlimited size, ideal for the Californian redwoods.

Gang saw blades

For the precision cutting of natural stones, the gang saw blades of variable dimensions and capacities are serving all types of marbles and other materials plants (except granite) for well-shaped blocks.

Sawing technique

Fixing the block

gang saw,As far as possible only use blocks of consistent length corresponding to the effective segmented length of the diamond blades. In this way there will be a regular wear of the diamond segments. Sound securing of the block is essential because in practice this leads to reduced sawing vibrations, lower wear on the segments and higher down-feed speeds.

Cooling

The quantity, quality and good distribution of water for cooling are important factors affecting the blade life and the quality of the cut. Soft well-decanted water should therefore be used, especially when working with materials giving rise to sticky or abrasive muds.

Down-feed speed

gang saw,The down-feed speed is an essential parameter in frame-sawing. It affects not only the production per hour but also the quality of the cut and the pressure exerted on the segments to avoid glazing of the diamond impregnation. In any case the down-feed speed should be sufficient to ensure the self-sharpening process of the diamond segments.

Sawing approach

Start the saw using a low down-feed speed. As soon as the blade’s segments bite into the material gradually increase the down-feed speed till normal working speed is reached. This should be maintained until the whole block is cut.

Sawing plan

gang saw,In dealing with the same quality of stone – and this is the case for quarries – it is possible to decide on and maintain an optimal speed. However this cannot be done when successively sawing various different materials. In this case not only should feed speeds be modified, according to the nature of the stone, but different types of stones should be alternated. Sawing therefore should be carefully planned both to ensure a maximum blade life and to avoid frequent mounting and dismounting of blades.

Alternating materials

In sawing various types of materials on the same machine – in the case of marbles – nearly always the same blades are used, whereas the ideal solution would be to employ two, or sometimes three, sets of blades of different types. However it is logical to use a single set of blades, and in fact this will be effective provided that the materials are classified beforehand, according to their hardness and their abrasiveness. Moreover the down-feed should be appropriate to each material and there should be an alternate sawing of hard or compact materials and soft or crystalline ones.


braba gang saw, Isfahan Mahmoud Abad Street 26 Western, Industrial Zone of stone processing machines Barabbas, Isfahan, Isfahan 1234567890, Iran - Phone: +98 313 38040100 Secondary phone: +98 9131190674 Fax: +98 313 38040100 Email: info@braba.net URL:
Saturday
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday

Route

Your location:

Did you find apk for android? You can find new Free Android Games and apps.
By | 2017-06-18T15:15:07+00:00 June 18th, 2017|public|5 Comments

About the Author:

5 Comments

  1. […] Gang Saw,Frame-saw is composed of diamond segments, or small bits of diamonds that are embedded onto the edges of gangs saw blades. Here, in order to assist in the cutting of stone blades, water is used as an abrasive medium to help cooling down the blade instead of steel bits. As the gangs saws blades cut through the blocks of stone, the gang saw that is used may not cut into a straight path because of its abrasive action causes vibration to the gang saw. As a result, the stone slabs that are cut using these types of gangs saws blades differ in thickness within one stone slab. These types of gangs saws blades are economically used for granite cutting, or to cut any other hard stone that does not require even sawing finish. The purchase of diamond gangs saw blades cost more, but produces quicker sawing action. This type of gangsaw(frame-saw) is normally used for marble and concrete cutting, which is popular in developed countries and the area abound with marble. […]

  2. […] Gang Saw,Frame-saw is composed of diamond segments, or small bits of diamonds that are embedded onto the edges of gangs saw blades. Here, in order to assist in the cutting of stone blades, water is used as an abrasive medium to help cooling down the blade instead of steel bits. […]

  3. […] Gang Saw,Frame-saw is composed of diamond segments, or small bits of diamonds that are embedded onto the edges of gangs saw blades. Here, in order to assist in the cutting of stone blades, water is used as an abrasive medium to help cooling down the blade instead of steel bits. […]

  4. […] Gang Saw,Frame-saw is composed of diamond segments, or small bits of diamonds that are embedded onto the edges of gangs saw blades. Here, in order to assist in the cutting of stone blades, water is used as an abrasive medium to help cooling down the blade instead of steel bits. […]

  5. […] Gang Saw,Frame-saw is composed of diamond segments, or small bits of diamonds that are embedded onto the edges of gangs saw blades. Here, in order to assist in the cutting of stone blades, water is used as an abrasive medium to help cooling down the blade instead of steel bits. […]

Leave A Comment Cancel reply